![](https://vitalflux.com/wp-content/uploads/2020/09/Screenshot-2020-09-09-at-8.17.33-AM-300x210.png)
In this post, you will learn about boosting technique and adaboost algorithm with the help of Python example. You will also learn about the concept of boosting in general. Boosting classifiers are a class of ensemble-based machine learning algorithms which helps in variance reduction. It is very important for you as data scientist to learn both bagging and boosting techniques for solving classification problems. Check my post on bagging – Bagging Classifier explained with Python example for learning more about bagging technique. The following represents some of the topics covered in this post:
- What is Boosting and Adaboost Algorithm?
- Adaboost algorithm Python example
What is Boosting and Adaboost Algorithm?
As like bagging, Boosting is an ensemble method which makes use of a unique sampling technique for creating an ensemble classifier. In boosting technique, the data for the training is resampled and combined in an adaptive manner such that the weights in the resampling are increased for those data points which got mis-classified more often. In other words, the data points get combined to create new sample while assigning more weights to misclassified data points. Boosting is found to be more effective in variance reduction than bagging. The variance reduction comes from the aspect of adaptive resampling.
As like bagging, boosting technique is very effective for the classifiers which are found to have high variance. For example, decision tree classifier. For stable classifiers built using algorithm such as K-NN (K-nearest neighbours) or linear discriminant analysis (LDA) which are found to have low variance, bagging or boosting may not have much impact.
What is Adaptive Boosting?
Adaptive boosting (also called as AdaBoost) is one of the most commonly used implementation of boosting ensemble method. Adapting boosting combines (boosts) the weak learners to form a strong learner. Here is a diagram used for illustrating boosting classification technique:
![Understanding Boosting Classification](https://vitalflux.com/wp-content/uploads/2020/09/Screenshot-2020-09-09-at-8.17.33-AM.png)
From the above diagram, lets understand how adaptive boosting classifier works by ensembling three classifiers (classifier 1, 2 and 3).
- Classifier 1 (clf1) classifies the points (pic 1). There are some points (blue points) that get misclassified.
- The misclassified points are given more weights and weights of correctly classified points get reduced. A new classifier (clf2) is trained with new training data set having more weights assigned to the misclassified points and lesser weights to correctly classified points (thus, adaptive resampling). Look at pic 2 where misclassified points have given higher weight which is represented using larger circle and correctly classified points got reduced in size. New classifier (clf2) again results in misclassification of few points (3 blue points).
- The misclassified points classified by clf2 gets higher weights (larger circle) and correctly classified points get lower weights (size reduced). Third classifier (clf3) gets retrained with new training datasets with weights for each data points updated. Take a look at picture 3.
- Finally, the ensemble adaptive boosting classifier (clf4) is constructed by ensembling three classifiers constructed / fitted / trained using different training datasets created as a result of adaptive resampling. Take a look at picture 4 which represents the adaptive boosting (AdaBoost) classifier created by ensembling three classifiers.
Adaboost classifier can use base estimator from decision tree classifier to Logistic regression classifier. As described above, the adaboost algorithm begins by fitting the base classifier on the original dataset. Subsequently, the additional copies of the same base classifier is fitted on the same dataset but the weights of incorrectly classified instances by the previous classifier are adjusted such that subsequent classifiers focus more on difficult cases.
The classifiers used for training are called as weak classifiers. These are called weak classifiers because they perform better than the random guessing but still classifies the data in poor manner.
Adaboost Algorithm with Decision Tree as Base Classifier
With decision tree, the weak classifiers used in adaboost classifier are decision stumps. The decision stumps are nothing but a tree with one node and two leaves. Adaboost classifier represents a forest of such decision stumps. The decision stump makes use of just one feature or variable to make the decision. These decision stumps are not great at making accurate classifications. Full-size decision trees or random forest makes use of all variables to make a decision while decision stumps make use of just one variable to make a decision. This is why decision stumps are called as weak learners.
Decision stumps used in AdaBoost classifier are different from decision trees in Random Forest in the sense that some decision stumps may have higher say or weight in the final classification. In Random Forest, each decision tree have equal weight or say in final classification.
Calculating Weights for Each Decision Stump
The weight or the amount of say that each decision stump will have in final decision can be calculated using the following formula:
![Weight that each decision tree carries vis-a-vis final decision](https://vitalflux.com/wp-content/uploads/2020/12/Screenshot-2020-12-13-at-12.08.00-PM.png)
The plot of weight or amount of say vs total error made by a decision stump will look like the following. Lesser is the total error, higher is the weight or amount of say by each decision stump.
![Amount of Say or Weight vs Total Error of Decision Stump](https://vitalflux.com/wp-content/uploads/2020/12/Screenshot-2020-12-13-at-12.08.28-PM.png)
Assigning Weights to Training Data
The training data used in subsequent decision stumps have some of the data set assigned higher weights than the others. The weights assigned to to the training data is a function of misclassification and weight of the classifier. Those data set which got classified correctly will have its weight reduced and those data set which got classified incorrectly will get its weight bumped up. The new sample weight for mis-classified data set can be expressed as the following:
New sample weight = old sample weight * e^classifierWeight
or
New sample weight = old sample weight * e^amountOfSay
The new sample weight for correctly classified data can be calculated as the following:
New sample weight = old sample weight * e^-classifierWeight
or
New sample weight = old sample weight * e^-amountOfSay
Based on new weights assigned to training data, the new data sample is created. It is likely that the training data having high weight (mis-classified) will be picked up multiple times and hence, new data sample will have duplicate copies of mis-classified data.
Adaboost Algorithm Python Example
An AdaBoost classifier is an ensemble meta-estimator that is created using multiple versions of classifier trained using a base estimator. The first version of classifier gets trained on the original dataset. The later versions get trained on the same dataset but the weights of incorrectly classified instances are adjusted such that subsequent classifiers focus more on difficult cases.
In this section, Sklearn.ensemble AdaBoostClassifier is used for illustrating the AdaBoost classifier. Two models have been fit for illustration purposes. One model is fit using DecisionTreeClassifier and other is fit using AdaBoostClassifier with base estimator used as DecisionTreeClassifier. You will see that the ensemble model trained using AdaBoostClasssifier has a higher accuracy and better generalization performance (test accuracy is greater than training accuracy).
Model fit using DecisionTreeClassifier
Here is the Python code for model which is fit using Sklearn.tree DecisionTreeClassifier. The tree is a decision stump with the max_depth set to 1.
from sklearn import datasets
from sklearn.model_selection import train_test_split
from sklearn.preprocessing import StandardScaler
from sklearn.svm import SVC
from sklearn.tree import DecisionTreeClassifier
from sklearn.pipeline import make_pipeline
from sklearn.ensemble import AdaBoostClassifier
#
# Load the breast cancer dataset
#
bc = datasets.load_breast_cancer()
X = bc.data
y = bc.target
#
# Create training and test split
#
X_train, X_test, y_train, y_test = train_test_split(X, y, test_size=0.25, random_state=1, stratify=y)
#
# Pipeline Estimator
#
pipeline = make_pipeline(StandardScaler(),
DecisionTreeClassifier(criterion='entropy', max_depth=1, random_state=1))
#
# Fit the model
#
pipeline.fit(X_train, y_train)
#
# Model scores on test and training data
#
print('Model test Score: %.3f, ' %pipeline.score(X_test, y_test),
'Model training Score: %.3f' %pipeline.score(X_train, y_train))
![](https://vitalflux.com/wp-content/uploads/2020/09/Screenshot-2020-09-09-at-10.25.17-AM.png)
The accuracy of the model comes out to be 91.6% for test data set and 91.5% for the training data set. Good model with with decent generalization performance. In the following section, we will see how does the model performance look like for model trained using AdaBoostClassifier.
Model fit using AdaBoostClassifier
Here is the code for model fit using sklearn.ensemble AdaBoostClassifier. Pay attention to some of the following:
- Base estimator (base_estimator) is set to DecisionTreeClassifier. This represents the weak classifier or weak learner.
- Number of estimators is set to 100. This represents number of weak learners to be trained in each iteration.
- Algorithm is set to SAMME. Another algorithm is SAMME.R
- Learning rate is set to 0.005. Learning rate represents weights of weak learners.
#
# Standardize the dataset
#
sc = StandardScaler()
X_train_std = sc.fit_transform(X_train)
X_test_std = sc.transform(X_test)
#
# Creating a decision tree classifier instance
#
dtree = DecisionTreeClassifier(criterion='entropy', max_depth=1, random_state=1)
#
# Instantiate the bagging classifier
#
adbclassifier = AdaBoostClassifier(base_estimator=dtree,
n_estimators=100,
learning_rate=0.0005,
algorithm = 'SAMME',
random_state=1)
#
# Fit the AdaBoost classifier
#
adbclassifier.fit(X_train, y_train)
#
# Model scores on test and training data
#
print('Model test Score: %.3f, ' %adbclassifier.score(X_test, y_test),
'Model training Score: %.3f' %adbclassifier.score(X_train, y_train))
![](https://vitalflux.com/wp-content/uploads/2020/09/Screenshot-2020-09-09-at-10.31.20-AM.png)
The accuracy of the model comes out to be 93.7% for test data set and 92.3% for the training data set. Better model with with better generalization performance than DecisionTreeClassifier.
Here is a great tutorial video on AdaBoost algorithm:
Conclusions
In this post, you learned some of the following concepts in relation to boosting and adaboost algorithm:
- Boosting technique is an adaptive resampling technique used for training different classifiers using modified training dataset based on assigning appropriate weights to misclassified data and correctly classified data.
- AdaBoostClassifier makes use of boosting technique to assigning higher weights to misclassified data, lower weights to correctly classified data and sampling again to train the next classifier.
- Base estimators for Adaboost algorithm can be used from Decision Trees to Logistic Regression.
- Boosting classification helps in reducing variance.
- Boosting classifier suits well for unstable classifier – Classifier trained using algorithms such as DecisionTreeClassifier which results in classifier with high variance.
- Boosting technique is found to reduce variance more than the Bagging classifier.
- ROC Curve & AUC Explained with Python Examples - August 28, 2024
- Accuracy, Precision, Recall & F1-Score – Python Examples - August 28, 2024
- Logistic Regression in Machine Learning: Python Example - August 26, 2024
Leave a Reply